|
Item # LANCSAT
Price $275
Weight 2 lb 12 oz
|
|
Lanchester semiauto tube. This tube can be used to make a semiauto or dummy Lanchester.
This tube has a reduced diameter of 1 5/16" and can't be modified to accept a full
auto bolt. The OD has been turned as well as the correct cap threads and barrel threads.
The venting holes have been drilled and the front sight dovetail has been machined.
The template has the other features drawn on it that require machining. This can be finished
with a dremmel tool, however a milling machine is recommended. Made from American 1020 DOM steel.
These tubes are made per order. Please allow 15 to 20 business days for delivery.
|
|
Item # LANCSAK
Price $270
Weight 2 lb
|
|
This is a semiautomatic bolt system for the British Lanchester. This system is compatible
with our semiauto Lanchester tube and will accept an original extractor and cocking handle
for an authentic look. This kit includes the following high quality American made parts: a
semiauto bolt, standard AR-15 firing pin, roll pin, firing pin spring, bolt stop, guide rods,
2 sets of springs, and assembly instructions. The hammer needs to be flame hardened which
is explained in the instructions.
Please note: Most Lanchester trigger groups do not have
a selector switch. The trigger group will have to be modified and a disconnector installed
that will function similar to the STEN trigger groups.
This design is based on our ATF approved STEN MK3 model. Other US made parts may be needed to
be compliant with GCA 18 U.S.C. 922r.
Due to current supply issues, our semi auto kits may not include the firing pin. If so, the
price will be reduced to compensate for the missing part. The bolts use a standard AR-15 firing pin.
There are two typical sizes of collars on them and our bolts use the ones with the smaller collar of .340”.
|
|
Item # LANCB
Price $200
Weight 1 lb 4 oz
|
|
Lanchester Barrel made from high quality steel. This is a brand new barrel made from high
quality steel and is made to the same dimensions as the original barrels. Screw in and ready
to shoot.
|
|
Item # LANCE
Price $75
Weight 4 oz
Backordered
|
|
Lanchester Ejector
Made from high grade 4140 tool steel. This ejector is an exact copy of the original.
|
|
Item # LANC-BOLT
Price $165
Weight 1 lb 4 oz
Backordered
|
|
New high quality British Lanchester bolt that is an exact copy of the full auto original. This bolt will work with
original parts or our reproduction parts. This bolt has the features that the original bolts have and
precision machined to the same dimensions. Bring that tired machinegun back to life or complete a partial
Lanchester parts kit. Stop worrying about using original rare parts. Hardened and in the white.
|
|
Item # LANC-SAFETY
Price $45
Weight 2 oz
|
|
This is a new safety latch for the Lanchester submachine gun.
Made from high quality 4130 tool steel.
|
|
Item # LANCCAP
Price $150
Weight 4 oz
|
|
New British Lanchester end cap. This end cap is a high quality reproduction. The threads
are interrupted just like the originals and the knurl is nice and clean. Heat treated for a long
life. The locating pin is to be installed by the buyer.
|
|
Item # HANDLE-LANC-MP28
Price $50
Weight 2 oz
|
|
Cocking handle for the Lanchester or MP-28. Brand new.
|
|
Item # PIN-LANC-MP28
Price $95
Weight 1 lb 10 oz
|
|
New Firing pin for the Lanchester or MP-28. Very well made and hardened.
|
|
Item # LANC-MP28-EX
Price $65
Weight 4 oz
|
|
This is a shell extractor for the British Lanchester or German MP-28. The MP-28 and Lanchester
extractor are completely interchangable and this may fit other German submachine gun models. A must-have for the
WW2 reenactor or gun collector. Made from high quality hardened spring steel.
|
|
|
Item # MP-28SAT
Price $275
Weight 2 lb 12 oz
|
|
MP-28 semiauto tube. This tube can be used to make a semiauto or dummy MP-28.
This tube has a reduced diameter of 1 5/16" and can't be modified to accept a full
auto bolt. The OD has been turned as well as the correct cap threads and barrel threads.
The venting holes have been drilled. The magazine well location, ejection and sear port are
scribed directly on the steel. The cocking handle slot is machined .08 deep. Made from
American 1020 DOM steel. These parts are made per order. Please allow 15 to 20 business
days for delivery.
|
|
|
Item # MP-28SAK
Price $270
Weight 2 lb
|
|
This is a semiautomatic bolt system for the German MP-28. This system is compatible with
our semiauto MP-28 tube and will accept an original extractor and cocking handle for an
authentic look. This kit includes the following high quality American made parts: a semiauto
bolt, standard AR-15 firing pin, roll pin, firing pin spring, bolt stop, guide rods, 2 sets
of springs, and assembly instructions. The hammer needs to be flame hardened which is
explained in the instructions.
Please note: This design is based on our ATF approved STEN MK3 model. Other US made parts
may be needed to be compliant with GCA 18 U.S.C. 922r.
Due to current supply issues, this kit may not include the firing pin. If so, the price will be
reduced to compensate for the missing part.
|
|
Item # MP-28B
Price $225
Weight 1 lb 4 oz
|
|
MP-28 Barrel made from high quality steel. This is a brand new barrel made from high quality
steel and is made to the same dimensions as the original barrels. Has the threaded hole (10-32)
on the front to accept the locking screw. Screw in and ready to shoot.
|
|
Item # MP28-BOLT
Price $190
Weight 1 lb 4 oz
|
|
New high quality MP-28 Bolt that is an exact copy of the original. This bolt will work with original parts or our
reproduction parts. This bolt has the disconnect groove cut in the side
for the semiauto function as well as other features that the original bolts have. Bring that tired machinegun
back to life and stop worrying about using original rare parts. Hardened and in the white.
|
|
Item # MP28HSCREW
Price $10
Weight 1 oz
|
|
MP-28 Magazine Housing to Stock Screw. This screw is an exact copy with the correct metric thread.
Made from Stainless Steel.
|
|
Item # MP28BSCREW
Price $10
Weight 1 oz
|
|
MP-28 Barrel Screw. This screw is an exact copy of the original with the correct metric thread.
Made from stainless steel.
|
