|
Item # BAR-RAILS
Price $180.00
Weight 2 oz
|
|
BAR Rails. These are a new matched pair of bolt rails for the Browning Automatic Rifle.
The rivet holes are drilled and they are heat treated.
|
|
Item # MP-40-FBP-EX
Price $65.00
Weight 4 oz
|
|
This is a new broken shell extractor for the German MP-40 submachine gun or the FBP clone.
The MP-40 and FBP extractor are completely interchangable and this may fit other German submachine gun models
such as the MP-38. A must-have for the WW2 reenactor or gun collector.
Made from high quality hardened spring steel.
|
|
Item # GG8B
Price $350.00
Weight 1 lb 7 oz
|
|
Grease Gun M3 and M3A1 .45 Auto Barrel. This is a new 8" barrel for the famous M3 or M3A1
grease gun. Made from high grade tool steel and chambered in .45 auto. I have seen used
barrels sell for more than what these new barrels cost. Bring new life back to that famous
piece of history.
|
|
Item # GGEX
Price $55.00
Weight 1 oz
|
|
Grease Gun M3 M3A1 Extractor
|
|
Item # GGExPin
Price $15.00
Weight 2 oz
|
|
Grease Gun Extractor Pin. This is a new retaining pin for the grease gun extractor. Made from
heat treated tool steel.
|
|
Item # S31T
Price $225.00
Weight 1 lb 9 oz
|
|
Suomi KP 31 Tube. This is an unfinished receiver for the Suomi 31. The forward section is made from high quality
tool steel. It has the barrel jacket lugs and the barrel locating lug machined. The ejector is installed.
The outside diameter and the end cap threads are machined. The inside diameter is 1.230". The tube comes with a
high quality template that has important dimensions.
|
|
Item # S31SP
Price $45.00
Weight 9 oz
|
|
Suomi KP 31 Receiver Side Plates. One pair. These side plates are great for replacing the
torch cut plates on your lower receiver. Made from high quality 4130 tool steel.
|
|
Item # CZTUBE
Price $160.00
Weight 1 lb 10 oz
|
|
CZ 23 24 25 26 Tube 80% finished. This tube has all the lathe work finished
and the grooves interrupted for the end cap. The high quality template has the location
of the sight, cocking handle, magazine, sear, and ejection port laid out. The inside diameter is 1 3/8".
All ATF rules apply. The buyer is responsible for following all state and federal laws.
|
