|
Item # MK2SAT
Price $70
Weight 1 lb 3 oz
|
|
Semiautomatic partially machined receiver tube for the STEN MK2.
This is made from high quality American 4130 DOM tubing and designed to work with our conversion kit. When finished,
this tube will not accept a fully automatic bolt.
The high quality template is CAD drawn and includes critical dimensions and assembly tips. The front of the tube
is bored out to accept the original front barrel bushing. The back of the tube is bored out to accept the original
spring cup and retaining ring. You will need a dremmel tool or milling machine and a welder to
assemble. Design is based on our ATF approved MK3 model.
|
|
Item # MK2SAK
Price $250
Weight 2 lb
|
|
Semiautomatic build kit for the STEN MK2. This closed bolt system works extremely well and eliminates
the problems of kits offered by other companies. You will need this kit, one of our partially machined receiver tubes,
and an original MK2 parts kit in order to build a legal semi automatic firearm. This kit includes the following
high quality American made parts; a semi-auto bolt, cocking handle, standard AR-15 firing pin, roll pin, firing pin spring,
bolt stop, guide rods, rod retainer, hammer, recoil springs, barrel extension, and assembly instructions. Two small parts
need to be welded together and the hammer needs to be flame hardened (explained in instructions). The barrel extension is a
non-rifled tube that is slipped over and welded to the existing barrel. It is not included if you order a 16"
barrel at the same time. Design is based on our ATF approved MK3 model. 922r compliant.
|
|
Item # MK2B16
Price $115
Weight 1 lb 10 oz
|
|
16" barrel for the STEN MK2. These barrels are made from high quality steel and have a 10 groove
right hand twist. Chambered and ready to install.
|
|
Item # MK2MH
Price $165
Weight 14 oz
|
|
This is a brand new magazine housing for the STEN MK2. They are beautifully crafted to exact tolerances
for consistent fit and function. All components are new and are fully interchangeable with original parts.
These are made better than the original parts and contain heat treated components for a long life.
These housings are made in the USA and are 922r compliant.
|
|
Item # MHCKIT
Price $70
Weight 7 oz
|
|
This kit will allow you to convert your STEN MK3 magazine housing into a STEN MK2 or MK5 housing.
Kit comes with full instructions and necessary hardware (shown in picture). Other parts are needed to
convert an entire MK3 parts kit to a MK2 or MK5. A great item for those wanting a hard to find
MK2 parts kit. Some cutting and welding required for assembly.
|
|
Item # STENEX
Price $30
Weight 1 oz
|
|
Extractor for the MK2 and MK3 Sten. This is a new Sten extractor and is an exact copy of an original.
Made from quality American steel and hardened.
|
|
Item #MK2BHG
Price $60
Weight 6 oz
|
|
This is a STEN MK2 hand guard. Made to the exact specifications of the original ones.
|
|
Item #MK2BN
Price $35
Weight 4 oz
|
|
Barrel nut for the STEN MK2 or MK5.
|
|
Item #MK2E
Price $10
Weight 1 oz
|
|
Ejector for the STEN MK2 or MK5.
|
|
Item #MK2BS
Price $35
Weight 2 oz
|
|
Barrel screw for the STEN MK2 or MK5. Made from hardened 4140 tool steel.
Can be used to make custom handguards, or silencers if you have the proper FFL.
No FFL required for purchase.
|
|
Item #SPRINGS
Price $8
Weight 1 oz
|
|
A set of recoil and hammer springs for our semi-auto build kits.
|
