|
Item # MK5SAR
Price $110.00
Weight 1 lb 3 oz
|
|
Semiautomatic 80% finished receiver for the STEN MK5 and is designed to work with our conversion
kit. This is made from high quality American 4130 DOM steel. The ejection and sear ports are
scribed directly on the steel and the magazine port is located by a slot. The cocking handle,
“J” groves, and pivoting slots are finished. The ejection finger is already installed which makes
assembly much easier. Please note that I have seen two different style barrel nuts for the MK5.
The barrel nut or the tube may need to be slightly modified. Requires a dremmel tool or milling
machine to finish.
|
|
Item # MK5SAK
Price $250.00
Weight 2 lb
|
|
Semiautomatic build kit for the STEN MK5. This closed bolt system works extremely well
and is approved by the BATF. You will need one of our 80% receivers and a MK5 parts kit along
with this conversion kit to build a legal semi auto. This kit includes assembly instruction, a
barrel extension, and all of the internal parts you need to build a legal semi auto. The bolt
is designed to function with the shell extractor for the MK2 or MK3. The MK5 extractor may not
fit. Requires welding and basic hand tools to assemble a few parts.
|
|
Item # MK5B16
Price $170.00
Weight 1 lb 10 oz
|
|
9mm 16” barrel for the STEN MK5. These barrels are made from high quality steel and have a
10 groove right hand twist. The end of the barrel has the tabs milled into it for the front
sight. Chambered and ready to install.
|
|
Item # MK5B
Price $150.00
Weight 1 lb
|
|
9mm STEN MK5 standard length barrel, brand new. Made from high quality steel. The end has the
tabs milled to accept the front sight and is machined to factory specs. Chambered and ready to go.
|
|
Item # MK5OR
Price $95.00
Weight 1 lb
|
|
80% receiver for the STEN MK5. This is made from high quality American 4130 DOM steel.
The ejection and sear ports are scribed directly on the steel and the magazine port is located
by a slot. The cocking handle, “J” groves, and pivoting slots are finished. The ejection finger
is already installed which makes assembly much easier. Recommended for licensed manufacturers.
Requires a dremmel tool or milling machine to finish.
|
|
Item #MK5BHG
Price $80.00
Weight 6 oz
|
|
This is a STEN MK5 hand guard. Made to the exact specifications of the original ones.
|
|
Item #MK5BN
Price $35.00
Weight 4 oz
|
|
Barrel nut for the STEN MK2 or MK5.
|
